- 
                        货号 KVV00301 
- 
                        描述 PRINCIPLE OF THE ASSAY This assay employs the quantitative sandwich enzyme immunoassay technique. An antibody specific for SARS-CoV-2 RBD has been pre-coated onto a microplate. Standards or samples are pipetted into the wells and any SARS-CoV-2 RBD present is bound by the immobilized antibody. After washing away any unbound substances, a biotin-labeled SARS-CoV-2 RBD antibody is added to the wells. After washing away any unbound substances, Streptavidin-HRP is added to the wells.Following a wash to remove any unbound enzyme reagent, a substrate solution is added to the wells and color develops in proportion to the amount of SARS-CoV-2 RBD bound in the initial step. The color development is stopped and the intensity of the color is measured. 
- 
                                靶标 RBD
- 
                                应用 Used for the quantitative determination of SARS-CoV-2 RBD concentration in serum, plasma, bronchoalveolar lavage fluid and nasopharyngeal swab samples.
- 
                                检测方法 Colorimetric
- 
                                样本类型 Serum, Plasma and Cell culture supernatant.
- 
                                实验类型 Quantitative
- 
                                检测范围 12.5 - 800 pg/mL
- 
                                灵敏度 4.92 pg/mL
- 
                                精准度 Intra-Assay Precision (Precision within an assay): <10% Three samples of known concentration were tested sixteen times on one plate to assess intra-assay precision. Inter-Assay Precision (Precision between assays): <15% Three samples of known concentration were tested in twenty four separate assays to assess inter-assay precision. 
- 
                                回收率 80-120%
- 
                                运输 2-8 ℃
- 
                                稳定性和存储 When the kit was stored at the recommended temperature for 6 months, the signal intensity decreased by less than 20%. For unopened kits, if you want to prolong the storage time, please store the Standard, Detection A, Detection B and Microplate at - 20℃, the rest reagents should be store at 4℃.









 
                 
            